Product introduction
CD1 wire rope electric hoist liyou manufacturers can according to customer needs to produce a customized product, this product is a single-speed wire rope electric hoist, CD1 wire rope electric hoist with light weight, submit small, features such as ease of operation/operation, and in the later use of easy maintenance operation, the product’s protection category IP44, IP54 these two. We often use the lifting height generally have 6m, 9m, 12m, 18m, 24m, 30m these several, CD1 electric hoist can be installed alone in the overhead i-beam, it can also be installed in electric or manual single beam, double beam, cantilever, gantry and other cranes. CD1 electric hoist is widely used in factories, warehouses, docks, power stations, logging yards and other occasions, is the ideal lifting equipment to lift goods.
Technical parameters
|
Models |
0.25TON |
0.5TON |
1TON |
2TON |
3TON |
5TON |
10TON |
|
Tons of lifting capacity |
0.25 |
0.5 |
1 |
2 |
3 |
5 |
10 |
|
Standard lifting height m |
3-9 |
6-12 |
6-30 |
6-30 |
6-30 |
6-30 |
6-30 |
|
Lifting speed M/min |
8(8/0.8) |
8(8/0.8) |
8(8/0.8) |
8(8/0.8) |
8(8/0.8) |
8(8/0.8) |
7(7/0.7) |
|
Speed of operation M/min |
20(30) |
||||||
|
Wire rope type |
6×19-3.6 |
6×37-4.8-180 |
6×37-7.4-180 |
6×37-11-155 |
6×37-13-170 |
6×37-15-200 |
6×37-15-200 |
|
I-beam track type |
16-22b |
16-28b |
16-28b |
20a-32c |
20a-32c |
25a-63c |
28a-63c |
|
Circular orbit Small radius meters |
0.8 |
1.5 |
1.5-4 |
2-4 |
2-4 |
2.5-5 |
3.5-9 |
|
Voltage V |
380 |
380 |
380 |
380 |
380 |
380 |
380 |
|
Frequency, Hertz |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
|
Phase number |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
Possible problems
Wire rope electric hoist operation standard
operators should comply with: daily operation before the electric hoist daily inspection. Do not use the stop limit device, and do not adjust the brake while lifting the load. The lifting weight is not allowed to pass over people when it is running.
Wire rope electric hoist limit how to connect
electric hoist is the protection device for the ascending and descending stroke of CD1/MD1 wire rope electric hoist, cut off the motor into the wire, up to prevent hook: top, down to prevent wire rope reversal. See detailed introduction.
Wire rope electric hoist how to hook up and down
In each link, the damage of the bearings will also affect the transmission of torque. Bearing damage will make the transmission mechanism of the components under eccentric load torque. The transmission shaft that bears eccentric load torque is easy to appear sloshing and twisting; the gear meshing is not smooth even causes the gear tooth to break; splines wear. These will affect the transmission of torque, resulting in load-bearing hook slide.
Electric hoist maintenance and maintenance electric hoist maintenance
always check the wire rope and its winding, found broken wire, broken strand and winding groove, random buckle and other anomalies should be handled in time, always ensure that the wire rope lubrication is good. The braking distance is too large to affect the normal work, should be adjusted. Test the action of the limit and lubricate the pull rod. Often check the fixed wire rope plug block or jade rope plate, drum and guide rope, and lubrication.
